DAG-A1V
page 4
DAG-A1V K06/0722
5. Brief description
The panel instrument
DAG-A1V
is a 4-digit device for direct voltage and direct
current signals and a visual limit value monitoring via the display. The
configuration happens via three front keys. An integrated programming interlock
prevents unrequested changes of the para-meter and can be unlocked again via
an individual code.
The electrical connection happens on the rear side via plug-in terminals.
Selectable functions like e.g. the recall of the min/max-value, a zero point
slowdown, a direct change of the limit value in operating mode and additional
measuring supporting points for linearisation complete the modern device
concept.
6. Assembly
Please read the
Safety instructions
on
page 16
before installation and keep this
user manual for future reference.
1.
After removing the fixing elements, insert the device.
2.
Check the seal to make sure it fits securely.
3.
Click the fixing elements back into place and tighten the
clamping screws by hand. Then use a screwdriver to tighten
them another half a turn.
CAUTION! The torque should not exceed 0.1 Nm!
