DAG-A1V
page 12
DAG-A1V K06/0722
11. Functional principle of the switching points
Limit value exceedance
“
High
”
The setpoint S1-S2 is “off”
below the threshold and “on”
on reaching the threshold.
Limit value undercut “
low
”
The setpoint S1-S2 is
“on” below the threshold
and switched “off” on
reaching the threshold.
Alarms / optical setpoint display
An activated setpoint can be optically indicated by flashing of the 7-segment
display.
Functional principle of the alarms
Alarm
Deactivated, display value
Threshold
Threshold/limit value for switch over
Hysteresis
Width of the window between the thresholds
Operating principle
Limit value exceedance / limit value undercut
