DAG-A1T
DAG-A1T
K05/0722page 7
9. Setting up the device
9.1 Switching on
Once the installation is complete, you can start the device by applying the current
loop. Check beforehand once again that all the electrical connections are correct.
Starting sequence
For 1 second during the switching-on process, the segment test (
8 8 8 8 8
) is
displayed, followed by an indication of the software type and, after that, also
for 1 second, the software version. After the start-up sequence, the device
switches to operation/display mode.
9.2 Standard parameterization:
To be able to parameterize the display, press the
[P]
key in operating mode for 1
second. The display then changes to the menu level with the first menu item
TYPE
.
