DAG-A1T
page 4
DAG-A1T K05/0722
5. Short description
The panel instrument
DAG-A1T
is a 4-digit device for temperature metering via
thermocouple and a visual limit value monitoring via the display. The
configuration happens via three front keys. An integrated programming interlock
prevents unrequested changes of the parameter and can be unlocked again via
an individual code.
The electrical connection happens on the rear side via plug-in terminals.
Selectable functions like e.g. the recall of the min/max-value, impedance matching
and a direct change of the limit value in operating mode complete the modern
device concept.
6. Assembly
Please read the
Safety advice
on
page 13
before installation and keep this user
manual for future reference.
1.
After removing the fixing elements, insert the device.
2.
Check the seal to make sure it fits securely.
3.
Click the fixing elements back into place and tighten the
clamping screws by hand. Then use a screwdriver to tighten
them another half a turn.
CAUTION! The torque should not exceed 0.1 Nm!
