Koblenz DP-1334 Operating And Service Instructions Download Page 10

ACCESORIOS NO INCLUIDOS

ACCESORIOS

CÓMO CUIDAR SUS ACCESORIOS

BASE DE ARRASTRE DEL COJINETE

Colóquelo directamente sobre la pulidora.
NO debe utilizarse directamente sobre el piso.

Coloque el cojinete bajo esta base.

Para nuestro modelo TP-2S-2015-DC (2 velocidades) utilice 
únicamente la base especial de arrastre, balanceada para 
máquinas de alta velocidad.

COJINETES PARA PULIR Y ENCERAR (color canela)

Remueven y disminuyen las capas de cera para mejorar el 
brillo y crear una capa de cera durable.
Remueve marcas de tacones, raspones, etc.

Colóquelos directamente sobre la base de arrastre.

COJINETES PARA RESTREGAR (fibra verde) 

Remueven manchas y mugre pegada al piso.
ideal para limpieza profunda en cualquier tipo de piso liso.

Colóquelos directamente sobre la base de arrastre.

CEPILLOS PARA ALFOMBRA

Lave alfombras con la espuma del shampoo sin mojar en 
exceso.

CEPILLOS PARA RESTREGAR

Remueven manchas y mugre pegadas en cualquier tipo de 
piso.

Colóquelos directamente en la pulidora.

• CUANDO LA PULIDORA NO SE UTILICE POR MÁS DE 10 MINUTOS, COLÓQUELA 

EN POSICIÓN HORIZONTAL. (Ver fig. 1)

• SI DEJA LA PULIDORA ENCIMA DEL CEPILLO O DE LA BASE DE ARRASTRE DEL 

COJINETE, CON O SIN EL COJINETE, ÉSTA SE PUEDE DEFORMAR. ESTA 
DEFORMACIÓN PUEDE CAUSAR VIBRACIÓN EXCESIVA. (Ver fig. 2)

• PARA INSTALAR LA BASE DE ARRASTRE DEL COJINETE Y EL CEPILLO O EL 

COJINETE, COLOQUE LA PULIDORA EN POSICIÓN HORIZONTAL.

• CAMBIE EL COJINETE CUANDO ÉSTE TENGA UN ESPESOR DE 1/4”. SI EL 

ESPESOR ES MENOR A 1/4”, LA BASE PUEDE DAÑARSE.

10

Summary of Contents for DP-1334













Reviews: