7065-SBXX Power Assist Cylinder
Kobelt Manufacturing Co. Ltd
Rev A
MNL-7065-SBXX
7 of 18
3
I
NSTALLATION
Figure 2 - 7065-SBXX rotation extents and hydraulic connections
3.1
M
ECHANICAL
The mounting of the cylinder should precede the connection of the unit to hydraulics if
possible. Figure 2 above indicates the rotation limits of the cylinder that should not be
exceeded. Also note that the rotation limits must be adhered to through the entire range of
motion of the cylinder, not just in the midships position. Dimensions of the cylinder when
installed to a tiller arm can be found on Figure 3 on page 8 and the tables that follow it.
If the cylinder has already been connected to a hydraulic power
source, ensure that pressure has been exhausted and the
pressure source has been locked out.
The cylinder foot must be mounted with fitted bolts or welded
stops must be installed to both ends of the foot. See Figure 3.
Ensure that the unit is mounted to a foundation that is capable
of support the loads that it can generate. If this is not taken into
consideration, then damage to the mounting structure can
occur.
