7
Vent option installation
1. Choose the require vent option.
NOTE: If the hood is to be installed as
ductless application, please do not remove
any duct knockout located at the top or the
back of the hood.
2. For 7” Round vent installation only:
-
Using a flat-head screwdriver to remove
the 7” duct knockout. (Refer to Figure 5)
-
Attached the 7” exhaust plate using 8
screws (provided). Refer to Figure 6.
3. For 3-1/4” x 10” vent installation only:
-
Using a flat-head screwdriver to remove
the top OR the rear 3-1/4” x 10” duct
knockout. (Refer to Figure 7)
-
Attached the 3-1/4” x 10” exhaust plate
using 6 screws (provided). Refer to
Figure 8 for Top Vent OR Figure 9 for
Rear Vent.
4. For
ductless
installation
only.
-
Remove the recirculating plate located
at the top of the hood, refer to Figure 10.
-
Reinstall the recirculating plate
horizontally as shown in Figure 11.
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Summary of Contents for CHX30 Series
Page 2: ...ENGLISH 1 FRENCH 24 SPANISH 47...
Page 16: ...14 DIMENSIONS OF THE MODEL...
Page 39: ...37 DIMENSION DU MODELE...
Page 62: ...60 MEDIDAS DE LA MODELO...
