79
INSTALACIÓN DEBAJO DE UN GABINETE
Preparación antes de la Instalación
NOTA: PARA EVITAR CAUSAR DAÑOS A SU
CAMPANA, EVITE QUE DESECHOS
PENETREN EN LA RENDIJA DE
VENTILACIÓN
.
-
Decida la ubicación para colocar el conducto de
ventilación de la campana hacia el exterior.
Consulte la Figura 1.
-
Un ducto de escape recto y corto permitirá que la
campana trabaje con más eficiencia.
-
Intente evitar tantas conexiones, codos y ductos
largos como sea posible. Esto podría reducir el
rendimiento de la campana.
-
Antes de instalar, conecte temporalmente la
campana
para
verificar
que
funcione
adecuadamente.
-
Retire la película protectora de la campana (si hay
alguna).
-
Utilice cinta de aislar (duct tape) para sellar las
uniones entre las secciones de los conductos.
-
Para instalar debajo del gabinete con la parte
inferior empotrada, coloque tiras para rellenar
madera de 4 pulgadas de ancho (no incluidas) de
cada lado. Consulte la Figura 2.
-
Utilizando las referencias de la página 91-92 para
mida y cree una abertura de acceso para los cables
eléctricos y el escape debajo del gabinete.
Vent option installation
PRECAUCIÓN
:
SOLO HERRAMIENTAS DE
USO MANUAL. NO APRIETE DEMASIADO LOS
TORNILLOS, ESTO PODRIA CAUSAR DAÑOS
A LA CAMPANA.
1. Elija la opción de ventilación requerida. Algunos
tornillos de instalación ya están fijados a la
campana.
2. Para instalación de ventilación de 6":
-
El tubo de escape de 6" ya ha sido fijado. (Figura
3) Alinee y asegure el Collar de plástico de 6" {F}
con dos tornillos a la campana.
3. Para instalación de ventilación superior de 3-1/4” x
10”:
-
Desmonte y deseche el tubo de escape de 6"
fijado. (Figura 3). Conserve 13 tornillos para
instalar el tubo de escape de 3-1/4” x 10” y la
cubierta de ventilación.
-
Alinee y asegure la cubierta superior de
ventilación {E} y el tubo de escape de 3-1/4” x 10”
{D} usando 14 tornillos (de los cuales 13
provienen del tubo de escape de 6"). (Figura 4)
Figura 1
Figura 2
Figura 3
Figura 4
Summary of Contents for CH7730SQB-1
