22
Instructions manual |
www.grupotemper.com
KPF-01
Power harmonic clamp meter
5. LCD display :4-digit digital display; 7-section LCD for displaying
measurement operation function, test result, and unit sign.
6.
H/
：HOLD button: Data hold function press down HOLD button, and
the last reading will be held and displayed on the display, and “HOLD”
symbol will be shown; press HOLD button again, and the meter will switch
back to normal measurement mode.
7. Trigger :Press down the trigger, and the clamp will open; release it, and
the clamp will close.
8. LED Lamp
In power and current mode ,press button open or close Lamp.
Knob Switch Operations
The function-switching knob is used for powering-on and for switching to
any measurement function in the following table.
Knob position description
Sign
Knob position
Functions
OFF
Powering-off position
For powering-off
KW
Active power position
For measuring active power, etc.
W
power position
For measuring active power, etc.
V∽
AC-Current harmonics test
position
For measuring AC-voltage
harmonics, etc.
A～
AC-Current harmonics test
position
For measuring AC-current
harmonics, etc.
mA～
AC-Current harmonics test
position
For measuring AC-Current
harmonics, etc.
Note:
When the meter is automatically powered off, be sure to switch the knob to
“OFF” position; turn on the meter after 5 seconds.