koban KMD 05, Instruction Manual, Page: 23 / 32

23 Instructions manual | www.grupotemper.com
KMD 05
Digital multimeter
• Place the tip of the thermocouple to the sufarce of the object be tested and
read the measurement on the display.
Warning
To prevent injury or damage to the meter, do not move the rotary switch
to the temperature position while measuring voltages exceeding 30V.
Specifications
General specifications
Safety Rating: CAT III, 600V; pollution degree II
Operating altitude: <2000m
Operating Temperature/
Humidity:
0°C to 40°, <80% RH
Storage Temperature/
Humidity:
-10°C to 60°C, <70% RH, remove battery
Temperature coefficient: 0.1 x accuracy/ºC(>18ºC or <28ºC)
Max. Input between terminals
and earth ground:
600V DC or AC rms
Fuse protection: μA/mA ranges: F 250mA/600V
10A range: F 10A/600V
Sample rate: Approx. 3 times/sec.
Display: 3 ½ digit LCD display
Overload Indication: Display shows OL
Low Battery Indication: When battery voltage drops below normal
operating voltage,
is shown on the
display.
Polarity Indication: Display automatically displays “ - ”
Power Source: 1 x 9V battery