KCTE-80
Thermal Imager
www.grupotemper.com
7.3.8-Factory Set
1-In Settings submenu, press “up” and “down” button, highlight “Factory Set”
2-Press “select” button, popup “Factory Set” submenu.
3-Press “OK” to restore factory setting, “Cancel” to exit without change.
Factory Settings of the Thermal Imager is as follow:
Image prItem
Parameter
Value
Measurement
Center Spot Measurement
off
Hot Spot Measurement
off
Cold Spot Measurement
off
Measurement Parameters Emissivity
0.95
Reflective temperature
25°C
Image
Mode
Infrared
Palette
Iron
Adjustment
Auto
System Setting
Language
English
HDMI Output
off
Laser
off
Lamp
off
