2 www.grupotemper.com
KMDS01
AUTORANGING MULTIMETER
FETY INFORMATION
The following safety information must be observed to insure
maximum personal safety during the operation at this meter:
z
Do not use the meter if the meter or test leads look damaged,
or if you suspect that the meter is not operating properly.
z
Never ground yourself when taking electrical measurements.
Do not touch exposed metal pipes, outlets, fixtures, etc.,
which might be at ground potential. Keep your body isolated
from ground by using dry clothing, rubber shoes, rubber mats,
or any approved insulating material.
z
Turn off power to the circuit under test before cutting,
unsoldering, or breaking the circuit. Small amounts of current
can be dangerous.
z
Use caution when working above 60V dc or 30V ac rms.
such voltages pose a shock hazard.
z
When using the probes, keep your fingers behind the finger
guards on the probes.
z
Measuring voltage which exceeds the limits of the multimeter
may damage the meter and expose the operator to a shock
hazard. Always recognize the meter voltage limits as stated
