Kobalt KCS 180B User Manual Download Page 29

Page: 29 / 33

kobalttools.com

CARE AND MAINTENANCE

CAUTION

A dull or improperly sharpened chain can cause excessive
motor speed during cutting, which may result in severe
motor damage.

• Lift the file away from the steel on each return stroke.

• Put a few firm strokes on every tooth. File all left hand

cutters in one direction. Then move to the other side

and file the right hand cutters in the opposite direction.

• Remove filings from the file with a wire brush.

WARNING

• Improper chain sharpening increases the potential of

kickback.

• Failure to replace or repair a damaged chain can

cause serious injury.

Top plate filing angle

• CORRECT 30° – file holders are marked with guide

marks to align file properly to produce correct top plate

angle.

30°

80°

TOP PLACE FILLING ANGLE

SIDE PLATE FILLING ANGLE

CORRECT

INCORRECT

LESS THAN 30°

MORE THAN 30°

Left hand Cutters

Right hand Cutters

Summary of Contents for KCS 180B


































Search results

Summary of Contents for KCS 180B

Reviews:

Related manuals for KCS 180B

Brands by name

Popular brands

Kobalt KCS 180B, User Manual

Search results

Summary of Contents for KCS 180B

Reviews:

Related manuals for KCS 180B

Brands by name

Popular brands