8
kobalttools.com
2. After recharge, slide the battery pack (I) into the
battery port. A simple push and slight pressure
ZLOOEHVXI¿FLHQW
2
I
USING YOUR BATTERY PACK
Note:
Before using the tool, read the instruction book carefully.
WARNING:
7KHFKDUJHUDQGEDWWHU\SDFNDUHVSHFL¿FDOO\GHVLJQHGWRZRUNWRJHWKHUVR
DO
NOT
attempt to use any other devices.
NEVER
LQVHUWRUDOORZPHWDOOLFREMHFWVLQWR\RXUFKDUJHURU
battery pack connections because an electrical failure and hazard will occur.
<RXUEDWWHU\SDFNLV
UNCHARGED
and you must charge once before use. When you charge the
new battery or one which has not been used for long periods of time, it may not reach full charge
until after you have discharged it fully in use and recharged it several times.
OPERATING INSTRUCTIONS
1. Plug the charger (M) into an appropriate outlet.
The light will be green. Insert the battery pack
,LQWRWKHFKDUJHU7KHOLJKWZLOOÀDVKUHGWR
indicate the charging process has started. On
completion of charge, the light will turn solid
green. The pack is now fully charged. Unplug
the charger and remove the battery pack.
WARNING
When battery charge runs out after continuous
use or exposure to direct sunlight or heat,
allow time for the battery to cool down before
recharging to achieve the full charge.
1
M
I
