12
kobalttools.com
OPERATING INSTRUCTIONS
6. The automatic spindle lock allows you to use
WKHGULOODVDUHJXODUVFUHZGULYHU<RXFDQJLYH
DQH[WUDWZLVWWR¿UPO\WLJKWHQDVFUHZORRVHQ
a very tight screw, or continue working when
the battery energy has expired. For manual
screwdriver purposes, the chuck is automatically
locked when the tool is off.
6
DRILLING
When drilling into a hard, smooth surface, use a center punch to mark the desired hole location. This
ZLOOSUHYHQWWKHGULOOELWIURPVOLSSLQJRIIFHQWHUDVWKHKROHLVROGWKHWRRO¿UPO\DQGSODFH
the tip of the bit at the point to be drilled. Depress the switch trigger to start the tool. Move the drill bit
into the workpiece, applying only enough pressure to keep the bit cutting.
DO NOT
force or apply side
pressure to elongate a hole.
WARNING
Tungsten carbide drill bits should always be used for concrete and masonry. When drilling in metal,
only use HSS drill bits in good condition.
ALWAYS
use a magnetic bit holder (not included) when
using short screwdriver bits. When driving screws, apply a small quantity of liquid soap or similar to
the screw threads to ease insertion.
BATTERY DISPOSAL
To preserve natural resources, please recycle or dispose of the battery pack properly. This battery
pack contains lithium batteries. Consult your local waste authority for information regarding available
recycling and/or disposal options. Discharge your battery pack by operating your drill, then remove
the battery pack from the drill housing and cover the battery pack connections with heavy-duty
adhesive tape to prevent short circuit and energy discharge.
DO NOT
attempt to open or remove any
of the components.
