15
CARE AND MAINTENANCE
All maintenance should only be carried out by a qualified service technician.
Cleaning
Before cleaning or performing any maintenance, remove the battery pack from the tool.
For safe and proper operation, always keep the tool and its ventilation slots clean.
Always use only a soft, dry cloth to clean your multi-tool; never use detergent or alcohol.
TROUBLESHOOTING
WARNING
• Set the lock on/off switch (E) to the lock position and detach the battery pack from the multi-tool
before performing troubleshooting procedures.
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
The multi-tool does
not work.
Battery pack charge is
depleted.
Charge the battery pack.
Strong vibration or
loud noise during
operation.
Accessory is not installed
securely.
Reinstall the accessory according
to
“Installing and Removing
Accessories”.
Motor overheating.
Cooling vents are
obstructed.
Clean and clear the cooling vents.
Do not cover vents with hand during
operation.
The LED worklight
blinks rapidly
The tool has stopped
working to protect internal
circuits.
Release the trigger switch, wait for
the tool to cool down and then start
the tool again.
The LED worklight
blinks slowly.
Low battery capacity.
Charge the battery.
