12
OPERATING INSTRUCTIONS
Accessory
Application
Cutting
1-1/4” Plunge Cut
Blade for wood
and metal
For deep plunge cuts in wood
and plastics; for fast separating
cuts of non-ferrous metal
profiles, non-hardened nails,
screws, and steel profiles with
smaller dimensions.
3-1/2” Flush-cut
Segment blade for
wood and metal
For separating and plunge
cuts in wood, wood with nails,
drywall, PVC, nails and screws.
Scraping
2” Rigid Scraper
For scraping residues of
mortar, concrete, tile and carpet
adhesives from hard surfaces.
Grout removal
3-1/2” Carbide
grout-removal
segment blade
For removing grouting joints
between wall tiles; for repair
work, cutting openings in tiles,
drywall, or plastic.
Sanding
3-5/8” sanding pad
For sanding surfaces close
to edges, corners, or hard to
reach areas. Depends on the
sanding paper.
3-5/8” sanding
sheet 60 grit
For coarse sanding of all
wooden materials and metal
materials, fiberglass, and
plastics.
3-5/8” sanding
sheet 120 grit
For face sanding and
smoothing small irregularities.
3-5/8” sanding
sheet 180 grit
For finish and fine sanding.
