KOB KOB PYROT SERIES, Operation And Maintenance Instructions

Page: 4 / 32

4
1 General Information
1.1 Foreword
Dear System Owner, you have made a good se-
lection in the PYROT. It will provide you with all
the advantages of a modern, economically effi-
cient heating system. Fully developed technology
in combination with a sturdy design guarantee a
high degree of operational reliability and a long
service life.
These Operating and Maintenance Instructions
contain important information for the intended
use, correct operation and proper maintenance of
the PYROT.
Non-compliance with the Operating and Main-
tenance Instructions will result in loss of the
guarantee.
If you still need any further information after study-
ing the Operating and Maintenance Instructions:
The Assembly and Installation Instructions contain
important information about:
-
Standards and regulations
- Structural surroundings of the boiler plant
-
Transport and assembly
- Water installation and electrical installation
-
Fire protection
- Commissioning
as well as an appendix with diagrams of connec-
tions and dimensions and the complete technical
specifications.
Our sales and services offices will be glad to pro-
vide you with any further information. Their ad-
dresses can be found on the reverse side of these
Operating and Maintenance Instructions.
1.2 Technical standing
The Operating and Maintenance Instructions are
in keeping with the PYROT at the time it is deliv-
ered. In the interest of our customers, we reserve
the right to make, without any notification re-
quirement, subsequent changes resulting from
further technology developments.
1.3 Intended use
The intended use of the PYROT is for incinerating
wood fuels.
The intended use of the PYROT is stipulated:
- in the regulations of the Assembly and Instal-
lation Instructions
- by the limits of the technical specifications
-
in Spec Sheet 1010 "Minimum Requirements
for Wood Fuels/Instructions"
- by the safety regulations in these Operating
and Maintenance Instructions.
Any other use of the PYROT or use of it going be-
yond this will be considered as unintended use
unless written approval by the manufacturer has
been obtained.
-
Operation of the PYROT by unqualified per-
sonnel, without any training or knowledge of
the Operating and Maintenance Instructions.
-
Disabling the safety or monitoring devices on
the PYROT.
- Removal of any protective covers or cladding
on the PYROT by unauthorised individuals.
-
Making any conversions or alterations to the
PYROT without approval by the manufacturer.
-
Using spare parts or accessories from other
manufacturers without approval by the manu-
facturer.
The operating organisation will be liable for
any damage or accidents in case of any unin-
tended use.
1.4 Technical data
The following important limit values apply to the
PYROT heating boiler:
- Max. operating pressure allowed ...........3.0 bar
-
Max. boiler temperature allowed ............. 100°C
- Min. return flow temperature allowed ........ 65°C
The complete technical specifications are listed in
the appendix of the Assembly and Installation In-
structions.
1.5 Information documented
The Operating Instructions contain the information
required according to the EC Directive on Ma-
chinery 98/37/EEC, Appendix 1, Number 1.7.4.
Issue: 2007-08_English
Prepared by: KaW/SclM
1.6 CE-certification
The PYROT is delivered with a CE-symbol on its
type plate and an EC attestation of conformity in
accordance with Appendix II A of the EC Directive
on Machinery 98/37/EEC.
If the PYROT is altered by equipment from other
manufacturers being added, or the safety equip-
ment or control system are combined with a dif-
ferent system and/or integrated into an overriding
system (building control system, etc.), then in the
European Union a new attestation of conformity
has to be issued before it is put on the market.