KoamTac SMARTSLED KDC400 Series, User Manual

Page: 70 / 231

KDC User
YOUR
KDC
70
3.5 Empty Battery
KDC100/200/250/300/350
The KDC will display the message
Empty Battery Connect USB
when the battery is empty.
Please charge the KDC IMMEDIATELY to prevent any interruptions while it is collecting data.
KDC20/30/400

Under 30% - Orange LED flickers at 1-second-intervals for 5 seconds every minute.

Under 20% - Orange LED flickers at 1-second-intervals for 10 seconds every minute.

Under 10% - Red LED flickers in 1- second-interval for 10 seconds every minute, and
the user will hear a beeping sound.
3.6 Buffer Full
The KDC will display the message Buffer Full when the size of collected data reaches 160KB
(85 version) / 60KB (86 version) or the number of collected barcodes reaches 10,240. To
prevent the loss of data, you should synchronize the data then reset the memory when this
message is displayed.
The 4MB version KDC reaches the Buffer Full condition in the following situations:

0.5MB Partition - Collected data size reaches 0.5MB or collected number is 25,600

1MB Partition - Collected data size reaches 1MB or collected number is 51,200

2MB Partition - Collected data size reaches 2MB or collected number is 102,400

3MB Partition - Collected data size reaches 3MB or collected number is 153,600

4MB Partition - Collected data size reaches 4MB or collected number is 204,800