‘B’
command
Parameters: None
Format:
‘B’
Output:
‘
xxxx
@’ where
xxxx
is the capacity of battery ( 0 – 100) in hex and @ means the end of data
Purpose:
Read the battery capacity of KDC100.
‘C’
command
Parameters: Date and Time value to be set in KDC100
Format: ‘C
YMDHmS
’ where Y is year(0 means 2000), M is month(1-12), D is day(1-31), H is hour(0-23),
m is minute(0-59) an S is second(0-59).
Output:
‘@’ all the times
Purpose:
Set Date and Time of KDC100.
‘c’
command
Parameters: None
Format: ‘c’
Output: ‘
YMDHmS
@’ where Y is year(0 means 2000), M is month(1-12), D is day(1-31), H is hour(0-23),
m is minute(0-59) an S is second(0-59).
Purpose:
Read current Date and Time of KDC100.
‘D’
command
Parameters: None
Format:
‘D’
Output:
‘!’ – KDC100 internal flash memory is full or Reading failure
‘@’ – Barcode reading success
Purpose:
Turns the motor on, then turns the laser on and starts scanning. When a barcode is found or if
timeout occurred, it stops the motor and turns off laser.
