2
Product Features
The buttons interface is powered via the Konnex bus and does not need any additional power
supplies.
The keypads have BLUE backlighting behind each control and WHITE backlighting all along
their transparent edges to illuminate the wall.
Both are controllable with suitable ETS communication objects.
The device is equipped with a buzzer, also programmable via ETS, in order to offer the best
acoustic feedback.
The interface is also equipped with a proximity sensor to turn on as the user's hand moves
closer.
The IP20 casing is designed for installation inside connector blocks intended to accept
conventional push-buttons.
Fixing is done with a spring-type latch to a frame which must be previously fixed to the
connector block via the appropriate self-tapping screws.