3 Function
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed
technical knowledge obtained in KNX training courses is a prerequisite to proper understanding.
The function of this device depends upon the software. Detailed information on loadable
software and attainable functionality as well as the software itself can be obtained from the
manufacturer´s product database. Planning, installation and commissioning of the device are
carried out with the aid of KNX-certified software. The latest versions of product database and
the technical descriptions are available on our website.
Intended use
-
Switching of electrical loads with potential-free contacts
-
Switching of electrically-driven Venetian blinds, roller shutters, awnings and similar
hangings
-
Switching of electrothermal actuators
-
Polling of conventional switching or push-button contacts, window contacts etc. in KNX
systems, for reporting of states, meter levels, operation of loads, etc.
-
Polling of external temperature sensors for heating control
-
Logic functions to control building functions
-
Mounting on DIN rail according to EN 60715 in distribution boxes
Product characteristics
-
Actuator functions Switching, Venetian blind, electrothermal drives
-
Actuator function switchable in pairs
-
Integrated push-button interface with 6 inputs
-
2 inputs for temperature sensors
-
Outputs can be operated manually
-
Feedback in manual mode and in bus mode
-
Scene function
-
Disabling of individual outputs manually or by bus
Switching function
-
Max. 6 switching outputs
-
Operation as NO or NC contacts
-
Logic and restraint function
-
Feedback function
-
Central switching function with collective feedback
-
Time functions: switch-on delay, switch-off delay, staircase lighting timer with run-on time
Blind function
-
Max. 3 Venetian blind outputs
-
Suitable for 230 V AC motors
-
Blind/shutter position directly controllable
-
Slat position directly controllable
-
Feedback of movement status, blind/shutter position and slat position
-
Forced position through higher-level controller
-
Safety function: 3 independent wind alarms, rain alarm, frost alarm
-
Sun protection function
Actuator function
-
Max. 2 outputs for electrothermal drives
-
Switching operation or PWM operation
-
Actuators with characteristics opened or closed without power controllable
-
Emergency operation in case of bus voltage failure for summer and winter
-
Protection against seized valves
-
Forced position
-
Cyclical monitoring of the input signals can be parameterized
i
PWM operation: electrothermal actuators only have the positions Open and Closed. In
PWM operation, switch-on and switch-off during the drive's cycle time achieves an almost
constant behaviour. Cycle times < 15 minutes shorten the lifespan of the relay outputs
2/7
82596803
j0082596803
26.01.2017
Multi station
