SiSonic
™
FLEX Evaluation Kit
KAS-33100-001
USER GUIDE
© 2012 Knowles Electronics
8
www.knowles.com
Installation Steps (Analog)
To access the output of the Mic-On-Flex Assemblies, follow the steps below.
1. Connect one of the three Analog FLEX PCB Assemblies to an Adapter PCB (Figure 4).
2. Solder wires to Power (P), Output (O) and Ground (G) Pins of the Adapter PCB
(Figure 6). The output of the microphone is mic level. An amplifier will be needed
to bring to line level.
3. Connect the soldered wires to the appropriate equipment. See the product
datasheet for specifications:
www.knowles.com/search/product.htm?x_sub_cat_id=3
Figure 6
The information contained in this literature is based on our experience to date and is believed to be reliable and
it is subject to change without notice. It is intended as a guide for use by persons having technical skill at their
own discretion and risk. We do not guarantee favorable results or assume any liability in connection with its use.
Dimensions contained herein are for reference purposes only. This publication is not to be taken as a license to
operate under, or recommendation to infringe any existing patents. This supersedes and voids all previous literature.
