Installation Steps (Digital)
To listen to the output of the Mic-On-Flex Assemblies with a headset, follow
the steps below.
1. Connect one digital FLEX PCB Assembly to an Adapter PCB. The edge
connectors must be visible. (Figure 4)
Note: The FLEX PCBs must be inserted when the Adapter PCBs are in the
“open” orientation (Figure 3, Page 4).
Figure 4
SiSonic
™
FLEX Evaluation Kit
KAS-33100-001
USER GUIDE
© 2012 Knowles Electronics
6
www.knowles.com