ACCESSORIES
7
1
MMA Welder
1 set
2
Operator’s Manual
1 pc
3
Electrode Holder
1 pc
4
Earth Clamp
1 pc
5
Face Mask with Filter
1 pc
6
Brush & Hammer
1 pc
No.
Description
Qty.
TRANSPORTATION AND STORAGE
NOTES: All above mentioned are based on the ordering
contact unless otherwise agreed by the parties.
• This machine is an indoor equipment and the attacks of
rain and snow should be avoided in the process of
transportation and storage. While loading and unloading,
more attention should be paid on the package with words
of warning. Storage warehouse should be kept dry with
good air circulation and no corrosive gas or dust.
The temperature should be maintained from
-25º C to 55º C and relative humidity must be lower than
90%.
• If the products are still needed to continue storing after
stripping, repacking should be carried out according to
original package’s requirement. Remember before
storage, don’t forget to clean and seal it with plastic
bags.
• Users should maintain the cartons and shock blocks in
order to be properly packaged in need of long distant
transportation. For the long distant transportation, it
should be retrofitted with a wooden case and mark
the “up” or “rain” symbols.
min
32
50
62
96
120
200
256
max
40
60
75
128
160
250
320
1.6 mm
2.0 mm
2.5 mm
3.2 mm
4.0 mm
5.0 mm
6.4 mm
1/16”
5/64”
3/32”
1/8”
5/32”
3/16”
1/4”
ROD DIAMETER
Amperage ratio according to electrode diameter
(Approximate value)
Note:
The table is only informative, it does not mean that
the equipment can operate all the listed electrodes
and diameters, only those that the amperage and duty
cycles allow.
JOB SUGGESTION
