KNOP CT901-BED, User Manual

Page: 5 / 10

©
KNOP Elektronik A/S
Fabriksvej 20

DK-7600 Struer

knop@knop.dk

knop.dk

+45 97840444 5
Setting the light
The bedside guard can switch on the light when the user leaves the bed and switch it off a short time after the user
returns to bed.
If the user does not wish to use the light, Max is set to 0%.
The Max value is factory set to 0%.
In the menu below, the brightness and the time the light should be on, after a transmitter has been activated, is set.
CT901R paired coding with a "Light slave" LS901
If you wish to use the CT901R to light up an apartment, e.g. when a patient gets up at night, you can place up to 5
additional light slaves in different rooms, all of which light up when the patient leaves the bed.
In the main menu, select LS-901. Then you follow the following scheme.
Press to menu "LS-901" to encode more light slaves.
CT901 BED
Log file
Clock
→
Light
LS-901
↓
Sender
Light
The light goes
out after:
→
Min. : 0%
Max. : 90%
Minutes : 30
CT901 BED
Log file
Clock
Light
→
LS-901
↓
Sender
LS-901
→
LS-901 nr. 1
LS-901 nr. 2
LS-901 nr. 3
LS-901 nr. 4
LS-901 nr. 5
LS-901 nr. 1
Empty
→
Add new
Add new #1
Put LS-901
in the mains
socket and wait
…
LS-901 nr. 1
ID: xxxxxx
→
Add new
Delete
Esc