KNOP CT901-BED, User Manual

Page: 4 / 10

©
KNOP Elektronik A/S
Fabriksvej 20

DK-7600 Struer

knop@knop.dk

knop.dk

+45 97840444 4
Start-up
When CT901R is shipped from the factory, the display is off.
CT901R is plugged into an electrical outlet, after which the display lights up.
CT901R should be on at all times, so it should be mounted in a fixed electrical outlet.
CT901R has a built-in battery backup.
If the display shows "Clock not set", the clock should be set. See "S
etting the clock " on page 4.
General information about programming the CT901R
Enter the Main Menu by holding down both arrow buttons for 3 seconds
Then you can navigate up and down with the green arrow buttons.
A menu line is selected with
"
→
" shows the active row.
"
↓
" at the bottom of the screen indicates that you can scroll further down.
"
↑
" at the top of the screen indicates that you can scroll further up.
"
↕
" shows that the value can be changed with the arrow buttons.
An entry is saved with
You jump back to the previous menu with
Setting the clock
Enter the Main Menu by holding down both arrow buttons for 3 seconds.
Navigate to the "Clock" menu and press Then set the clock using the arrow buttons.
The clock is not
set
System OK
or
11:08
6th March
System OK
˅
˄
3 sec.
CT901 BED
→
Log file
Clock
Light
LS-901
↓
Sender
Ent
Ent
Esc
Ent
CT901 BED
Log file
→
Clock
Light
LS-901
↓
Sender
Clock:
→
Hour :12
Minute :45
Day :ons
Date :6
↓
Month :Mar
Clock
↑
Minute :45
Day :Wed
Date :6
↓
Month :Mar
→
Year :2019