Knoll HDP2160 Installation And User Manual Download

Page: 28 / 64

–

PICTURE>>Basic Menu

Press the

MENU

button to open the

OSD

menu. Press the cursor ◄► button to move to the

PICTURE>>Basic

. Press the cursor ▲▼ button to move up and down in the

PICTURE>>Basic

. Press ◄► to change values for settings.

TEM

ESCRIPTION

Display Mode

Press the cursor ◄► buttons to set the Display Mode.

Brightness

Press the cursor ◄► buttons to adjust the display brightness.

Contrast

Press the cursor ◄► buttons to adjust the display contrast.

Color

Press the cursor ◄► buttons to adjust the video saturation.

Notes:

This function is only available when Component, Video input source is

selected.

Tint

Press the cursor ◄► buttons to adjust the video tint/hue.

Notes:

This function is only available when Component, Video with NTSC system

input source is selected.

Sharpness

Press the cursor ◄► buttons to adjust the display sharpness.

Notes:

This function is only available when Component, Video input source is

selected.

Reset Picture
Settings

Press the

ENTER

button to reset all settings to default values.

Summary of Contents for HDP2160

































































Search results

Summary of Contents for HDP2160

Reviews:

Related manuals for HDP2160

Brands by name

Popular brands

Knoll HDP2160, Installation And User Manual

Search results

Summary of Contents for HDP2160

Reviews:

Related manuals for HDP2160

Brands by name

Popular brands