background image

 

27

Limited Warranty 

Knoll Systems, Inc. (“Knoll”) warrants that each HD225 (“the Product”) sold hereunder will conform to and 
function in accordance with the written specifications of Knoll. Said limited warranty shall apply only to the 
first person or entity that purchases the Product for personal or business use and not for the purpose of 
distribution or resale. Said warranty shall continue for a period of two (2) years from the date of such 
purchase. The standard limited warranty excludes the lamps in projectors after 90 days or 500 hours and the 
accessories after one year. Knoll does not warrant that the Product will meet the specific requirements of the 
first person or entity that purchases the Product for personal or business use. Knoll’ liability for the breach of 
the foregoing limited warranty is limited to the repair or replacement of the Product or refund of the purchase 
price of the Product, at Knoll’ sole option. Replacement Product may be re-furbished in “like-new” condition, 
at Knoll’ sole discretion. To exercise the Purchaser’s rights under the foregoing warranty, the Product must 
be returned at the Purchaser’s sole cost and expense, to Knoll or to any authorized Knoll service center 
provided, and the Product must be accompanied by a written letter explaining the problem and which 
includes (i) proof of date of purchase; (ii) the dealer’s name; and (iii) the model and serial number of the 
Product. When sending your unit in for repair, please ship your unit in its original packing material or a Knoll 
approved ATA Shipping Case, or have a professional packaging company pack the unit. Please insure your 
shipment for its full value. A return authorization number, issued by the Knoll customer service department, 
must also be clearly displayed on the outside of the shipping carton containing the Product. 

Note: Remanufactured Products are exempt from the foregoing Limited Warranty. Please refer to the 
Remanufactured Product Warranty for applicable warranty information. 
 

WARRANTY LIMITATION AND EXCLUSION

 

Knoll shall have no further obligation under the foregoing limited warranty if the Product has been damaged 
due to abuse, misuse, neglect, accident, unusual physical or electrical stress, unauthorized modifications, 
tampering, alterations, or service other than by Knoll or its authorized agents, causes other than from 
ordinary use or failure to properly use the Product in the application for which said Product is intended. 

 

DISCLAIMER OF UNSTATED WARRANTIES

 

THE WARRANTY PRINTED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PURCHASE. ALL 
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
DISCLAIMED. THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE FACE HEREOF AND THE 
FOREGOING WARRANTY SHALL NOT BE EXTENDED, ALTERED OR VARIED EXCEPT BY WRITTEN 
INSTRUMENT SIGNED BY KNOLL. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN 
IMPLIED WARRANTY MAY LAST, SO SUCH LIMITATIONS MAY NOT APPLY TO YOU. 

LIMITATION OF LIABILITY

 

IT IS UNDERSTOOD AND AGREED THAT KNOLL’ LIABILITY WHETHER IN CONTRACT, IN TORT, 
UNDER ANY WARRANTY, IN NEGLIGENCE OR OTHERWISE SHALL NOT EXCEED THE RETURN OF 
THE AMOUNT OF THE PURCHASE PRICE PAID BY PURCHASER AND UNDER NO CIRCUMSTANCES 
SHALL KNOLL BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES 
OR LOST PROFITS, LOST REVENUES OR LOST SAVINGS. THE PRICE STATED FOR THE PRODUCT 
IS A CONSIDERATION IN LIMITING KNOLL’ LIABILITY. NO ACTION, REGARDLESS OF FORM, 
ARISING OUT OF THE AGREEMENT TO PURCHASE THE PRODUCT MAY BE BROUGHT BY PUR-
CHASER MORE THAN ONE YEAR AFTER THE CAUSE OF ACTION HAS ACCRUED. SOME STATES 
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES 
SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS LIMITED WARRANTY 
GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHT WHICH VARIES 
FROM STATE TO STATE. 

 

 Copyright 2004 Knoll Systems. All Rights Reserved. 

 
Knoll Systems 
11791 Machrina Way #210 
Richmond, BC V7A 4V3 
Canada 
www.knollsystems.com 
 

Summary of Contents for HD225




























Reviews: