background image

0901225 Rev: X6 (draft 10/09/20)

 

Page 3 of 12

 

PRE

-

RELEASE COPY 

--

 NOT FOR DISTRIBUTION

 

WARNING: Do not touch the tip of the sprayer when in use.

 

CAUTION: Wear protective clothing and eyewear when dispensing chemicals or 

other materials. Observe safety handling instructions (SDS) of chemical mfrs.

 

CAUTION: To avoid severe or fatal shock, always disconnect main power when 

servicing the unit.

 

CAUTION: When installing any equipment, ensure that all national and local 

safety, electrical, and plumbing codes are met.

 

 

 

 

IMPORTANT SAFETY INSTRUCTIONS

 

WARNING 

-

 When using the Stratus Pro

TM

, basic precautions should always be followed, including the following:

 

(a)

 

Read all the instructions in this manual before using the Stratus Pro

TM

.

 

(b)

 

To reduce the risk of injury, close supervision is necessary when the Stratus Pro

TM

 is used near children.

 

(c)

 

Do not contact moving parts.

 

(d)

 

Only use attachments recommended or sold by Knight.

 

(e)

 

Do not use outdoors. For indoor commercial use only.

 

(f)

 

The following shall be adhered to by the user:

 

--

 To disconnect, turn all controls to the off ("O") position, then remove plug from outlet.

 

--

 Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

 

--

 Unplug from outlet when not in use and before servicing or cleaning.

 

--

 Do not operate the Stratus Pro

TM

 with a damaged cord or plug, or after the appliance malfunctions or is 

dropped or damaged in any manner. Return the appliance to Knight for examination, repair, or electrical or 

mechanical adjustment.

 

(g)

 

To reduce the risk of electrical shock, do not put nozzle in water or other liquid. Do not place or store appliance 

where it can fall or be pulled into a tub or sink.

 

(h)

 

Connect to a properly grounded outlet only. See grounding instructions below.

 

(i)

 

Do not use below garage floor or grade level.

 

GROUNDING INSTRUCTIONS

 

This appliance must be grounded. In the event of malfunction or breakdown, grounding provides a path of least 

resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an 

equipment

-

grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is 

properly installed and grounded in accordance with all local codes and ordinances.

 

DANGER –

 

Improper connection of the equipment

-

grounding conductor can result in a risk of electric 

shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is 

the equipment

-

grounding conductor. If repair or replacement of the cord or plug is necessary, do not 

connect the equipment

-

grounding conductor to a live terminal. Check with a qualified electrician or 

serviceman if the grounding instructions are not completely understood, or if in doubt as to whether the 

appliance is properly grounded. Do not modify the plug provided with the appliance –

 

if it will not fit the 

outlet, have a proper outlet installed by a qualified electrician.

 

 

DANGER –

 

A qualified electrician should be consulted if there is any doubt as to whether an outlet box is 

properly grounded.

 

 

GENERAL SAFETY

 

Summary of Contents for Stratus Pro













Reviews: