background image

Swing Piston Pumps NPK 09 

 

Safety 

Translation of original Operating Instructions, English, KNF 121576-121579 11/20 

Annex I of Directive 2006/42/EC (general principles) are applied 
and observed: 

 

General Principles No. 1 

 

No. 1.1.2. / 1.1.3. / 1.3.1. / 1.3.3. / 1.3.4. / 1.4.1. / 1.5.1.* /  
      1.5.2.* / 1.5.8. / 1.5.9. / 1.7.4. / 1.7.4.1. / 1.7.4.3. 

(* only for pumps with AC motor)

 

As these partly completed machinery are OEM-models the power 
supplies and the equipment for disconnecting and switching-off the 
partly completed machinery respectively have to be considered 
when mounting as well as over-current and overload protective 
gear. 

In addition a protection against mechanical parts in motion and hot 
parts, if existing, has to be provided when mounting. 

The pumps conform to the Directive 2011/65/EU. 

The following harmonized standards have been used:  

NPK 09 DC 

NPK 09  

NPK 09.1 

NPK 09.2  NPK 09.1.2 

DIN EN 55014-1/2 

DIN EN 55014-1/2 

DIN EN 60034-1 

DIN EN 61000-3-2/3 

DIN EN 50581 

DIN EN 50581 

DIN EN 61000-6-1/2 

DIN EN 60335-1 

 

Tab. 2 

 

Only have repairs to the pumps carried out by the KNF Customer 
Service responsible. 

 

Customer service and  

repairs 

Summary of Contents for NPK 09

























Reviews: