Diaphragm Pump NMP 03
Safety
KNF Micro BA 309215-309218_NMP03-EN-0916_Rev01
Translation of original Operating and Installation Instructions, English
5
As these partly completed machinery are OEM-models the power
supplies and the equipment for disconnecting and switching-off the
partly completed machinery respectively have to be considered
when mounting as well as over-current and overload protective
gear.
In addition a protection against mechanical parts in motion, hot
parts, if existing, has to be provided when mounting.
The pumps comply with the fundamental requirements of Directive
2011/65/EU (RoHS2).
All repairs to the pump(s) must be carried out by the relevant KNF
customer service team.
Customer service and repairs
