KNF N96K E-W, Manual

Page: 7 / 36

Diaphragm pump N96_AC Safety
Translation of Original Operating and Installation Instruction, english, KNF 329772-329775 06/22 7
2 Safety
Observe the safety notices in Chapters Commissioning and Opera-
tion.
2.1 Personnel and target group
Personnel Make sure that only specially trained and instructed personnel work on the
pumps. This applies, in particular, to mounting, connection and servicing
work.
Make sure that the personnel have read and understood the operating in-
structions, particularly the chapter on safety.
Target group
Target group Definition
User Employee
Specialized personnel Specialized personnel are personnel
who
- have relevant professional training
in the field covered in the particular
section of text;
- have current knowledge of the field
covered in the particular section of
text.
Tab.3 Target group
Who-does-what matrix
Lifecycle phase User Specialized personnel
Transport X
Mounting X
Connection X
Commissioning X X
Operation X X
Servicing X
Troubleshooting X
Disposal X
Tab.4 Who-does-what matrix
2.2 Responsibility of the operator
The pumps are produced in accordance with the generally recognized
rules of engineering, as well as the occupational health, safety and acci-
dent prevention regulations. Nevertheless, dangers can arise during their
use that lead to injuries to the user or third parties or to damage to the
pump or other property.
Only use the pumps in perfect technical condition, for their intended use,
safely and with an awareness of the dangers and in observation of the op-
erating and installation instructions.
The components that are to be connected to the pumps must be designed
according to the pneumatic data of the pumps.
When connecting the pumps to the electrical power, observe the corre-
sponding safety rules.
Make sure that no hazardous situation, physical harm or impairment of the
pump can occur.
Operating
parameters
Only operate and install the pump under the operating parameters and op-
erating conditions described in Chapters
2.4 Operating conditions and 3
Technical data .