background image

Transport

Diaphragm pump N96_AC

16

Translation of Original Operating and Installation Instruction, english, KNF 329772-329775 06/22

5 Transport

General

CAUTION

Personal injury and/or property damage due to in-
correct or improper transport of the pump

In the event of incorrect or improper transport, the
pump can fall down, be damaged or injure per-
sons.

à

Use suitable auxiliary means if necessary
(carrying strap, lifting gear, etc.).

à

Where appropriate, wear suitable personal
protective equipment (e.g., safety shoes,
safety gloves).

CAUTION

Risk of injury from sharp edges on the packaging

There is a risk of injury from cutting on the sharp
edges when grabbing corners or when opening
the packaging.

à

Where appropriate, wear suitable personal
protective equipment (e.g., safety shoes,
safety gloves).

à

Transport the pump in the original packaging to the installation loca-
tion.

à

Store the original packaging of the pump (e.g. for later storage).

à

Inspect the pump for transport damage after receiving it.

à

Document any transport damage in writing.

à

Remove any transport locking devices on the pump prior to commis-
sioning.

Parameter

Parameter

Value

Storage temperature [°C]

+ 5 to + 40

Transport temperature [°C]

- 10 to + 60

Permissible humidity (non-condens-
ing) [%]

30 to 85

Tab.12 Transport parameter and storage parameter

NOTICE

Prior to commissioning, make sure that the pump
has reached the ambient temperature (

3 Techni-

cal data

).

Summary of Contents for N96K E-W





































Reviews: