Diaphragm liquid pump with linear drive FMM 80
Installation and connection
KNF Flodos AG BA_FMM80_EN_08_164464.docx
Translation of original Operating and Installation Instructions
9
6. Installation and connection
Install the pumps only under the operating parameters and condi-
tions described in
Chapter 4 Technical Data
.
Observe all safety precautions (see
Chapter 3
).
6.1. Installation
Before installation, store the pump at the installation location to
bring it up to ambient temperature.
Mounting dimensions (see
Fig. 3
)
Fig. 3: Mounting dimensions FMM 80
Make sure that the installation location is dry and the pump is
protected against water in the form of rain, spray, splashes and
drips.
Protect the pump against dust.
Protect the pump against vibration and impact.
Generally speaking, the pump can be mounted in any installa-
tion position. For maximum precision and rapid venting, install
pump in the optimum position (Fig. 4: Optimum installation po-
sition).
Fig. 4: Optimum installation position
Mounting dimensions
Installation location
Installation position
