KNF FMM 80 Operating And Installation Instructions Download Page 2

Page: 2 / 22

Diaphragm liquid pump with linear drive FMM 80

About this document

KNF Flodos AG BA_FMM80_EN_08_164464.docx
Translation of original Operating and Installation Instructions

1. About this document

1.1. Use of the Operating and Installation Instruc-

tions

The Operating and Installation Instructions are part of the pump.



Forward the Operating and Installation Instructions to any

subsequent owners of the pump.

Customer-specific project pumps (pump models which begin with
"PL" or "PML") may differ from the Operating and Installation
Instructions.



In the case of project pumps, take note of any additionally

agreed specifications.

1.2. Symbols and markings

Warning

WARNING

This symbol indicates a potential danger.

It also indicates the possible consequences of failure
to observe the warning. The signal word (e.g. "Warn-
ing") indicates the level of danger.



Here you will see actions for avoiding the danger

and potential consequences.

Danger levels

Signal word Meaning

Consequences if not observed

DANGER

warns of immedi-
ate danger

Consequences include death or
serious injuries and/or serious
property damage

WARNING

warns of potential
danger

Death or serious injuries and/or
serious property damage are
possible

CAUTION

warns of a poten-
tially dangerous
situation

Minor injuries or damage to
property are possible

Tab. 1

Other information and symbols



This indicates an activity (step) that must be carried out.

This indicates the first step of an activity to be carried out. Any

additional steps required are numbered consecutively.

This symbol indicates important information.

Project pumps

Summary of Contents for FMM 80























Search results

Summary of Contents for FMM 80

Reviews:

Related manuals for FMM 80

Brands by name

Popular brands

KNF FMM 80, Operating And Installation Instructions

Search results

Summary of Contents for FMM 80

Reviews:

Related manuals for FMM 80

Brands by name

Popular brands