27
Fill water tank (6-1/1) with approx. 15 liters of
water.
Connect plug with the on-site outlet (3x 400 V, 16 A).
Turn “Grinding motor” switch (3-5/2) to “ON” position. The grinding wheel, wet-grinding belt
and finned brush start rotating.
Check the direction of rotation of the finned
brush.
The direction arrow (6-2/1) indicates the direction
of rotation of the wet-grinding belt and finned
brush.
If the finned brush is rotating in the right direc-
tion, then the direction of rotation of the grinding
wheel and of the wet-grinding belt is also correct.
If the direction is rotating in the wrong direction,
have the phase reversed by a qualified electrician.
ATTENTION
If the direction of rotation is incorrect, the
grinding wheel, finned brush and contact disc
may come loose.
6. Commissioning
All work must be performed by authorized trained personnel.
Observe the locally applicable safety and accident prevention regulations.
There is a risk that hands, hair, and clothing may be pulled in while the
grinding machine is switched on.
Serious injury may result. Wear personal protective equipment.
CAUTION
Figure 6-1
Filling the water tank
Figure 6-2
Checking the direction of rotation
1
1
