23
3. Description
3.5 Functional description of units
1
Cup grinding wheel (S 200 S | S 200 T)
Quickly removes a great deal of material. Used to easily repair heavily damaged cutter
knives. Chamfered edges, e.g. on circular knives, are attached to the cup grinding wheel.
The desired grinding angle can be steplessly adjusted.
Fixtures:
• HV 207 Swivel arm: for grinding sickle-shaped cutter knives
• HV 203 Universal grinding arm: for grinding linear and sickle-shaped cutter knives
• HV 205-1 Circular knife grinding attachment: for grinding circular knives 80 – 250 mm
• HV 205-2 Circular knife grinding attachment: for grinding circular knives 250 – 470 mm
• HV 201 Dressing tool: for dressing the cup grinding wheel
2
Finned brushes (all versions))
For deburring and polishing linear and sickle-shaped cutter knives as well as hand knives.
3
Wet-grinding belt (all versions)
Enables tapered and convex grinding. Cutter knives are ground in corresponding clamping
devices. Hand knives are ground without fixtures.
Fixtures:
• HV 261 Belt-grinding attachment: for grinding sickle-shaped cutter knives.
• HV 262 Universal belt-grinding unit: for grinding sickle-shaped and linear cutter knives
2
3
1
Figure 3-15
General view of grinding machine (S 200 S floor model | HV 203 | HV 262)
