10
• failure to observe the instructions with regard to transportation, commissioning, operation,
maintenance and repair of the belt grinding attachment,
• unauthorized structural alterations to the belt grinding attachment,
• unauthorized modification of such aspects as drive conditions (power and speed) and
• insufficient monitoring of machine parts that are exposed to wear
• use of unapproved replacement and wear parts
Use only original replacement and wear parts. If parts are purchased from external suppliers, there
is no guarantee that they are designed and manufactured to withstand the required level of stress
and provide the required level of safety.
2.4 Safety regulations
2.4.1 Organizational measures
All available safety devices must be checked regularly.
Observe prescribed intervals for recurring maintenance work or as specified in the operating
instructions.
2.4.2 Protective equipment
Before commissioning the belt grinding attachment, care must be taken to ensure that all protec-
tive equipment is properly mounted and functional.
Protective equipment may be removed only after the machine has stopped and has been secured
against accidental restarting of the belt grinding attachment.
If sub-components are supplied, the protective equipment must be correctly attached by the oper-
ator according to the instructions.
2.4.3 Informal safety measures
The operating instructions must be permanently available at the place of use of the belt grinding
attachment. In addition to the operating instructions, the generally applicable as well as the local-
ly relevant accident prevention regulations must also be made available and observed.
All safety alert symbols and danger warnings on the belt grinding attachment must be complete
and clearly legible.
2. Safety