22
Then turn the main switch (7-6/1) of the
USK 160 S to the “I” position.
If the cutter knife is tightened, swivel the grinding
lever, grinding plate and knife forward again.
ATTENTION
Hold the grinding plate steady when
swiveling the grinding lever forward.
Otherwise this will swivel away, which may
result in injury.
7.2.4 Grinding the cutter knife
Turn the hand wheel (7-7/3) in clockwise direction
until the locking lever (7-7/1) engages in the first
locking position of the locking disc (7-7/2).
NOTICE
Press with the thumb on the locking lever
(7-7/1) to move to the first locking position.
Turn the hand wheel (7-7/3) clockwise with
the remaining four fingers.
Tighten the star handle (7-8/2) to be able to
move the locking disc.
Figure 7-6
Switching on the grinding machine
1
7. Operation
Figure 7-7
Turning the hand wheel to first
locking position
3
2
1
