21
7. Operation
7.2.2 Mounting the grinding plate
The grinding plate (7-3/1) is placed over the spacer
discs (7-2/1).
The follower pin of the locating bolt (7-3/2) must
engage in the driver bore of the grinding plate
(7-3/1).
Using the grinding lever (7-4/1), the grinding plate
(7-4/2) is fixed to the belt grinding attachment
(7-4/3).
For that, turn the grinding lever (7-4/1) on the
locating bolt (7-4/4) in clockwise direction.
7.2.3 Clamping on the cutter knife
When clamping the knife, swivel back the grind-
ing plate (7-5/2) and grinding lever (7-5/1).
The knife (7-5/3) is clamped onto the grinding
plate (7-5/2) by inserting the bolts (7-5/6) of the
grinding plate into the holes on the knife (7-5/3).
The knife is locked to the grinder (7-5/5) by turn-
ing the bolts left.
Figure 7-3
Mounting the grinding plate
Figure 7-4
Attaching the grinding plate with
grinding lever
1
2
1
4
3
2
Figure 7-5
Tightening the cutter knife to the
grinding plate
1
2
3
6
5
