Data Vault
USER INSTRUCTIONS
Page 7
ENGLISH
c. Closed Position
Lift rod out of the notch and hold rod in
location shown, slide the rod rearward
to allow the hatch to close.
III. Lockable Hatch
Hatch can be locked to protect valuables while momentarily away.
Simply attach any padlock through the locking tab and loop of the rod.
IV. Installing a Printer (printer not included in 118-02)
a. Install lose drawer into pre-installed drawer slides. Refer to drawer
removal instructions on page 10.
b. Plug the power cord and USB
connection into back of printer and
place printer on upper shelf in left
compartment. Route the power cable
through center dividing walls into
compartment on right side. Plug
power into UPS in the surge protector
without battery backup.