
Page 10
ENGLISH
VIII. Drawer adjustment:
If you need to move any of the bottom drawers, to fit your printer or
computer, follow these instructions:
a. Drawer Removal and Installation
1. To remove a drawer (FIG. 8), pull
the drawer out till it stops. Notice
the locking levers located inside the
track that is attached to the drawer.
Lift lever (A) while pressing down on
the right lever (B). Pull drawer clear
of the sides.
2. To replace a drawer, simply insert
the drawer slide into the cabinet slide
and close the drawer completely.
The mechanism will automatically
latch.
b. Drawer Slide Install
1. Take one slide (FIG. 9) and insert
the clips (inset) into the front and
rear notches of the drawer support
panel. Push the slide to the rear and
down. Secure the slide through the
end access hole in the slide.
2. Remove #6X1/2 screws to adjust
locations of drawers.