KMS UEGO Display manual
Version 1.01
5
4. Installation of the lambda sensor
The Lambda sensor needs to be fitted in the exhaust.
(see appendix)
Installation angle should be inclined at least 10° towards horizontal
(electrical connection upwards). Thus preventing the collection of liquids
between sensor housing and sensor element during the cold start phase.
(note : for hot applications (THexagon>500°C) the thread boss should be at least
13 mm or longer to avoid overheating of the protection tube welding and to cool
down the sensor hexagon.
Recommended material for the thread boss in the exhaust pipe :
Temperature resistant stainless steel.)
(note : The use of cleaning/greasing fluids or evaporating solids at the sensor
plug connection is not permitted.)
