KMR 3516, Technical Data Spare Parts

Page: 4 / 36

Only those fasteners specified under technical data
(see 1) may be used.
When filling the magazine, hold the tool so that the
muzzle is not pointing towards own body or towards
any other person.
Do not load the tool with fasteners with the safety
yoke or trigger depressed.
To open the magazine, open the guide flap (k) using
the notch lever (l) and swing open the magazine cover.
The spring mounted support plate (n) can be adjusted
and fixed at 3 levels (a scale for the corresponding
nail lengths can be found in the bottom part of the
magazine). Insert the nail coil in such a way that the
beginning of the coil is in the driver channel. Close the
magazine cover and lock the guide flap.
The penetration depth of the nail head is adjusted
using air pressure. Should this not suffice, a more
exact setting of the penetration depth can be achieved
by turning the setting nut (p).
Right-hand turn (U) = less penetration depth.
Left-hand turn (D) = more penetration depth.
A setting wheel on the trigger (s) can be turned to set
the type of actuation either to single trigger release
or release on contact (see symbol).
The noise level when working can exceed 85
db (A). Wear
Wear Wear
Wear ear
ear ear
ear protection!
protection! protection!
protection!
* Measured values determined according to
EN 12549:1999.
** Measured values determined according to
ISO 8662-11:1999.
1 Coil nailer
1 Tool use and safety instructions
1 Technical data sheet
3 SUPPLIED WITH
7 ACCESSORIES
6 SWITCHABLE ACTUATION
-SINGLE TRIGGER RELEASE/RELEASE ON CONTACT-
2 NOISE/VIBRATION INFORMATION
5 FIL PENETRATION DEPTH SETTING
4 FILLING THE MAGAZINE 1 TECHNICAL DATA
4 I English 3516
Type Type Type Type 3516 3516 3516 3516
Dimensions mm 270/255
Weight kg (without fasteners) 2,3 kg
Single sequential or contact actuation
Recommended operating pressure
range 4 - 8 bar/0,4 -
0,8 MPa
Maximun permissible operating
pressure 8,5 bar / 0,85
MPa
Air consumption per driving
operation 1,6 l at
6 bar / 0,6 MPa
Magazine capacity.
No. of fasteners
120
Penetration depth setting yes
Fasteners: Fasteners: Fasteners: Fasteners: Wire Wire Wire Wire bound bound bound bound nail nail nail nail coils coils coils coils
Nail length mm 19-45
Head diam. Ø mm 10,5
Recommended Recommended Recommended Recommended lubricant lubricant lubricant lubricant
1 litre special oil. Code No. 9 4420
250 cm3 grasa especial. Code No. 68 3868
Noise
Noise Noise
Noise characteristic
characteristic characteristic
characteristic values
values values
values *
* *
* 3516
3516 3516
3516
A-weighted single-event emission
sound pressure level at work
station L pA, 1s
87 87 87 87 dB(A) dB(A) dB(A) dB(A)
A-weighted sound power level
L WA, 1s, d
100 100 100 100 dB(A) dB(A) dB(A) dB(A)
Vibration
Vibration Vibration
Vibration characteristic
characteristic characteristic
characteristic values
values values
values **
** **
**
Weighted r.m.s.-acceleration (a) 2,5
2,5 2,5
2,5 m/s2
m/s2 m/s2
m/s2
Code No.
Balancer for 20-30 N (2.0-3.0 kp),
cable travel 2.0 m (6.5 ft) 40 3407
KMR