background image

WARRANTY POLICY 

  KELLEY MANUFACTURING COMPANY (KMC) warrants that all goods sold 
to  the  original  purchaser  of  any  KMC  product  shall  be  free  of  any  defects  in    
material  and  workmanship  if  used  under  normal  operating  conditions.    The   
warranty period begins on the date of purchase by the retail customer and ends 
twelve  (12)  months  thereafter.    KMC’s  sole  responsibility  is  to  repair  and/or     
replace the defective part or parts at no cost to purchaser.  This remedy is the 

SOLE AND EXCLUSIVE REMEDY 

of purchaser. 

  The purchaser must fill out and return the warranty registration form found in 
the  front  of  the  operator’s  manual.    Failure  to  return  the  warranty  registration 
form  within  30  days  shall  result  in  the  goods  being  sold  “AS  IS”,  and  all         
warranties shall be excluded. 

  This  warranty  shall  not  apply  to  those  items  that  are  by  nature  worn  in       
normal  service,  including  but  not  limited  to  belts,  springs,  teeth,  chains,  etc.  
Items such as tires, tubes, and gearboxes and all other items warranted by the 
original manufacturer are warranted only to the extent of their individual     man-
ufacturer warranty, and KMC is not warranting any of said items.  All      warran-
ty  claims  must  be  made  through  a KMC  licensed  dealer,  and a warranty  form 
request must be submitted to KMC within 30 days of failure or the warranty pro-
vision shall be unenforceable against KMC. 

  No agent or person has authority to change or add to this warranty as written. 

THE  ABOVE  IS  THE  ONLY  WARRANTY  MADE  BY  KMC  AND  IS  MADE      
EXPRESSLY  IN  LIEU  OF  ALL  OTHER  WARRANTIES,  EXPRESSED  OR           
IMPLIED. KMC MAKES NO WARRANTY OF MERCHANTABILITY AS TO ANY 
GOODS  MANUFACTURED  BY  KMC  AND  FURTHER,  KMC  DOES  NOT   
WARRANT ANY SUCH GOODS AS SUITABLE FOR ANY PARTICULAR PUR-
POSE  TO    THE  RETAIL  CUSTOMER.    THE  SUITABILITY  OF  GOODS  FOR 
ANY  PURPOSE  PARTICULAR  TO  THE  CUSTOMER  IS  FOR  THE             
CUSTOMER, IN HIS SOLE JUDGEMENT, TO DETERMINE.  KMC FURTHER 
MAKES  NO  WARRANTIES  WITH  RESPECT  TO  ITS  MANUFACTURED 
GOODS THAT WOULD NORMALLY BE DISCLOSED BY AN EXAMINATION.  
THIS IS THE FULL AND FINAL EXPRESSION OF ALL WARRANTY LIABILITY 
OF  KMC.    NO  OTHER  WARRANTY,  EITHER  EXPRESSED  OR  IMPLIED, 
SHALL BE ENFORCEABLE AGAINST KMC. 

Kelley Manufacturing Co. 

80 Vernon Drive / Zip 31794 

P.O. Drawer 1467 / Zip 31793 

Tifton GA 

Summary of Contents for 48 Series





















Reviews: