B
A
1. Insert the bottom tube (A) into the marble base.
2. Put the rough surface of the flat washer, spring
washer and the hexagon bolt in order to insert
the bottom tube. Use the spanner to screw down
the hexagon bolt. Ensure the cable exits from the
back of the lamp.
3. Insert the bent tube (B) to the bottom tube (A) while pulling
the cable gently through the outlet of the bottom tube (A).
Fix both tubes by threading the screw provided into screw
hole (C) using the small Allen Key (provided in the accessory
pack).
C
B
A
4. Insert the bulb (not included) into the
lampholder (D).
D
B
A
Installation Instruction Manual
