20
4
.
Connect the assembled parts by last step with the finished Platform,climbing ladder
parts together,connect the Top Bar B(A2)with shrink end together with the Connection
tube(four-way)A15 by tightening screw a1(M8*50), then connect the Top Bar C(A3) with
the finished Climbing webbing parts together by tightening the screw a1(M8*50),then all
the Top bar will be finished connecting as below show.
Attention!Pay attention to direction of the Top Bar C(A3),the end of the through-hole
next to the Spin parts.
3.Connect the Spin parts(B1)with the Connect steel plate by tightening screw b1(M8*65),
and assemble the bigger pin again as below show.
1
2
3
B2
B1
b1
a1
a1
A3