Klugmann DORMAGEN, Operating Instructions Manual

Page: 10 / 36

Hood
dimensions
A
60 198
90 348
120 498
Fig.9
Screw the hood to the ceiling plate (this requires great caution, because
the hood has a large mass). Each of the four angles should be fastened with
two screws in such a way that the angles are within the ceiling plate (Fig.10).
If the hood is to operate in a mode of external venting, you must install the
plastic pipe, connecting the hood turbine outlet with a ventilation channel.
Then, the hood must be connected to the mains. The last step is to screw the
inner mask to the ceiling plate (Fig.10).
Fig.10