A. General
The digital temperature controller "TCU-2Duo" controls
separately the heating of two KLS tyrewarmers with
integrated temperature sensors.
The two controllers with a common LED Display, 4
LED's and 6 buttons is easy to adjust and because of its
rugged design especially suited for motorcycle racing.
The controllers (TEMP 1 / TEMP 2) and the setpoint
settings can be adjusted with the regarding buttons
directly.
B. Description
13 mm LED-Display (self lighting temperature display);
Separate pre-adjustment for 4 temperatures
(HIGH-level: front/rear; LOW-Level: front/rear)
Mikroprocessor controlled and programmable by a
keypad and a High/Low quickswitch;
Digital temperature adjustment of the requested and
automatic display of the actual temperatures of the
tyres
2 LED's (“1” / “2”) to indicate the actual indicated
temperature "TEMP1" or "TEMP2"
LED "1" lighting: "TEMP1" is actually heating! LED "2"
lighting: "TEMP2" is actually heating!
Alarm function: Display is blinking if there is a temp
sensor failure ("F1H"/"F1L").
4-pole cable & plugs to the tyrewarmers.
Voltage: 220 - 240 V
Fully electronic, programmable, mikroprozessor controlled
temperature controller and display for two KLS tyrewarmers.
C. Operation
Connect TCU-tyrewarmers to the TCU-2Duo.
The tyrewarmers connected to the TCU-2Duo have
short connection cables with 4-pol. plugs and
integrated temperature sensors.
D. Colour marks fixed to the connection
cables
Cable colour marks for rear and front tyre!
"TEMP1"
"TEMP2":
POWER SUPPLY
Red
Yellow
Black
Rear tyre
Front Front
1 / 2
MOTO
| TYRE WARMERS
Temperature Control Unit TCU-2Duo
OPERATION MANUAL
